It’s essential to understand the sump pump installation cost you might experience when you add or replace one.
There are many factors that go into the sump pump cost you pay, including the type you have, labor costs, and the sump pump installers you choose.
Let’s learn more about sump pump costs and your options when installing one.
New Sump Pump Installation Cost in AZ
There are various factors involved in the cost to install a sump pump. These include the type of flooring, pump location, geographic location, and pump motor you have. Generally, sump pumps cost anywhere from $639 to $1,977.
The sump pump basin is often made using heavy-duty plastic and looks similar to a trash can. It shouldn’t collapse or flex.
If you’ve never had a sump pump before, you must dig a pit first. Then, you’ve got to consider your options, such as submersible sump pumps, pedestal sump pumps, water-powered sump pump products, and more.
The base of your pedestal sump pump is submerged, but the rest is over the basin. They often remove 35 gallons of water each minute and feature a 1/3-1/2 horsepower motor. Pedestal pumps are easier to service and access, but they’re usually louder.
If you’ve got a submersible sump pump, it sits completely underwater in your basin. It drains about 60 gallons of water each minute and has a 3/4 horsepower motor. The water muffles the noises, so submersible pumps are quieter than the pedestal pump. However, they’re harder to service and access.
[Read: How Often Should a Sump Pump Run? Everything You Should Know]
Aside from the size of your sump basin, you also have other things to consider when installing a sump pump. These include:
- The sump pump filter
- Battery backups
- Sump pump check valve
- Discharge pipe issues
- Digging a new sump pump pit
- Reserve pumps
Cost to Replace an Old Sump Pump in AZ
The sump pump replacement cost is often lower than installing a sump pump initially. This usually happens when you experience a full sump pump failure.
Typically, a sump pump replacement costs around $275 to $1,000 because you don’t have to dig the drainage system, install drainage pipes, and more. However, a submersible pump will be on the higher end because it does require some digging.
FAQs
What Is the Labor Cost to Install a Sump Pump?
Sump pump labor costs generally anywhere from $54 to $200 an hour for installation.
How Long Does It Take to Get a Sump Pump Installed?
If you replace a sump pump, it should only take one hour. However, there are more factors involved with installing a new one so it often takes two-four hours.
Likewise, you may consider a battery backup feature. This ensures the pumps keep working, even during a power outage. That can cost $1,220 to install in the crawl space, yard, or basement. Models featuring water pressure and the battery cost a little more.
Can You Add Sump Pumps to an Existing Basement?
Yes, it’s possible to add a basement sump pump after the space is already built. A combination sump pump might be your best bet.
Why Do Some Homes Not Have a Sump Pump?
Houses built on a concrete slab don’t have a basement and likely don’t require a sump pump. These machines are designed to take the water around your foundation and get it outside before it seeps into the basement.
How Do I Know If I Need a Sump Pump?
There are some red flags to indicate that you need a new system. These include:
- Strange Noises – Sump pumps make noise while they work, so if you notice unusual sounds, it’s a clue that something is wrong. Water can’t get removed if you have a bent impeller, so flooding is a genuine concern. Thumping, gurgling, and rattling could mean that your sump pump fails soon.
- Broken Pump – If you’ve checked the float switch and the pump isn’t working, you might have to replace it.
- Electrical Issues – If the pump is on but not pumping water, there might be an electrical issue. Likewise, your sump pump might use excessive energy, and it might be wise to get a newer model.
- Sump Pump Alarm Goes Off – Most systems feature an alarm to let you know there’s a sump pump problem. If you hear the alarm sounds, you know something is amiss, and you may need professional assistance.
Need a Sump Pump Cost Quote?
How much does it cost to get a pump installed? It all depends on your specific situation. Do you need a new sump basin or just the motor? Overall, the average cost for repair is $510, but a new system can be upwards of $2,000. It’s best to speak with a sump pump contractor to learn about your options.
Stellar Plumbing can help you navigate sump pump prices and determine what might work well for your home. Reach out to our expert plumbers today to get started on your project.